manualshive.com logo in svg

Komatsu WA380-8, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Komatsu WA380-8 Скачать руководство пользователя страница 160

CIGARETTE LIGHTER

The cigarette lighter is used to light cigarettes.
When the cigarette lighter is pushed in, it will return to its origi-
nal position after a few seconds, so pull it out to use it.
If the cigarette lighter is removed, the socket can be used as an
85 W (24 V x 3.5 A) power supply.

NOTICE
This cigarette lighter is for 24 V. Do not use this as a power
supply for 12 V equipment.

LAMP SWITCH

The lamp switch is used to light up the headlamps, clearance
lamps, tail lamps, and machine monitor.
Position (a): OFF
Position (b): Clearance lamps, tail lamps, and instrument panel
lamp light up.
Position  (c):  Headlamps  light  up  together  with  the  lamps  lit  in
position (b).

REMARK

The lamp switch can be operated regardless of the turn signal
lever position.

DIMMER SWITCH

The  dimmer  switch  is  used  to  switch  the  headlights  between
high and low beams.
Position (L): Low beam
Position (H): High beam

TURN SIGNAL LEVER

The turn signal lever is used to operate the turn signal lamp.
Position (L): The left turn (when the lever is pushed forward).
Position (N): OFF
Position (R): The right turn (when the lever is pulled backward).

REMARK

• When the lever is operated, the turn signal pilot lamp also

flashes.

• The lever returns automatically when the steering wheel is

turned back. If the lever does not return, move it by hand.

EXPLANATION OF COMPONENTS

OPERATION

3-96

Содержание WA380-8

















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды