Komatsu PC700LC-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 176 / 442

REMARK
Store the spare grease can in the storage place on the
rear of the cab.
HANDLE Komatsu Diesel Particulate Filter (KDPF)
k k
CAUTION
• Exhaust gas temperature may increase during the aftertreatment devices regeneration and the high
temperature may last after the completion of regeneration.
Avoid getting near the exhaust pipe outlet and around the aftertreatment devices to prevent being
burnt.
Also, keep combustible materials away from the exhaust pipe outlet and around the aftertreatment
devices to prevent a fire.
• When there are thatched houses, dry leaves or pieces of paper near the job site, set the system to
the regeneration disable to prevent fire hazards due to highly heated exhaust gas during the after-
treatment devices regeneration.
KDPF is a device to capture soot in the exhaust gas to purify
the exhaust gas.
If soot is accumulated to a certain level in the filter, a purifica-
tion process to burn the soot is performed automatically to
keep the filtering performance of KDPF high.
This purification process is called the “regeneration”.
If operations which lower the purification function of KDPF con-
tinues for long hours, the regeneration is performed to protect
the KDPF system, regardless of the quantity of the accumulat-
ed soot.
During the KDPF regeneration, aftertreatment devices regeneration pilot lamp (1) lights up on the monitor.
REMARK
Even if aftertreatment devices regeneration pilot lamp (1) lights
up, the machine does not need to be stopped and the work can
be continued, unless the caution lamp is displayed at the cen-
ter of the monitor.
The KDPF regeneration is performed automatically. However,
the accumulated soot may not be burnt sufficiently and the fil-
tering function may not be improved under certain operating
conditions.
EXPLANATION OF COMPONENTS OPERATION
3-110