Komatsu PC210-11 Скачать руководство пользователя

Страница: 31 / 522

Warning for operation, inspection and maintenance

• Warning
• a. Read the manual before operating, inspection, mainte-

nance, disassembly, assembly and transportation.

Warning when leaving the operator's seat

• b. Before standing up from operator's seat.
• Lower the work equipment to the ground and move safety

lock lever (located near seat) to lock position to avoid hit-
ting unlocked operation levers.

• Sudden and unwanted machine movement can cause seri-

ous injury or death.

Warning no passengers

• c. No passengers allowed to ride on the machine while it is

moving.

Warning danger of falling objects

• d. Do not operate where a danger of falling objects exists.

SAFETY

SAFETY LABELS

2-7

Содержание PC210-11










































































































































































































































































































































































































































































































































Результаты поиска

Содержание PC210-11

Отзывы:

Похожие инструкции для PC210-11

Бренды по названию

Популярные бренды

Komatsu PC210-11, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание PC210-11

Отзывы:

Похожие инструкции для PC210-11

Бренды по названию

Популярные бренды