Komatsu PC210-11 Скачать руководство пользователя

Страница: 267 / 522

COUNTER-ROTATION TURN

• Counter-rotation turn to left

Pull the left travel lever toward you.

Push the right travel lever forward.
The machine make a counter-rotation turn to the left.

• Counter-rotation turn to right

Pull the right travel lever toward you.

Push the left travel lever forward.
The machine make a counter-rotation turn to the right.

METHOD FOR SWINGING MACHINE

WARNING

• The tail of the machine extends outside the tracks.

Check that there is no one around the machine before
operating the swing.

• If the travel levers are operated when the engine speed

is decreased by the auto-deceleration function, the en-
gine speed will suddenly increase. Operate the levers
carefully.

• When you operate work equipment control lever, the

screen will switch to the screen including bird's eye
view automatically.

When swinging the upper structure, do as follows.
1.

Before swinging, turn swing lock switch (1) OFF (cancel-
led).
(a): ON position
(b): OFF position

Check that swing lock pilot lamp (2) is not lit.

OPERATION

MACHINE OPERATIONS AND CONTROLS

3-193

Содержание PC210-11










































































































































































































































































































































































































































































































































Результаты поиска

Содержание PC210-11

Отзывы:

Похожие инструкции для PC210-11

Бренды по названию

Популярные бренды

Komatsu PC210-11, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание PC210-11

Отзывы:

Похожие инструкции для PC210-11

Бренды по названию

Популярные бренды