Komatsu PC210-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 161 / 522

CHECK MESSAGE
1.
Press switch F6 on the standard screen.
When there is any message, message display (1) lights
up.
While message display (1) is lit, press switch F6, and the
mail confirmation menu (g) directly opens.
Select the mail confirmation menu (g), and you can read
the received message.
2.
In case of a message requesting for reply, the column of
“Numeric Input: []” is displayed in place (2) of the mail con-
firmation menu. Make a reply to the message.
REMARK
• (3) is the subject of the received message. When no
message is received, “No message” is displayed in
place (3).
• (4) is the serial number of received messages.
REPLY TO MESSAGE
1.
When replying to a message, input the selected item num-
ber in "Numeric Input" box (1) on the screen of mail confir-
mation menu (g). The selected item number is written in
place (2) of the message text.
• Input the number by using the monitor switch. Each
switch corresponds to the value shown on the right
side below the switch.
• If you input an incorrect number, press switch F5, and
you can clear an input character at a time.
• If switch F5 is pressed when the input column is blank,
the screen returns to the standard screen.
2.
After inputting a selected item number, press switch F6.
3.
When the message “Do you send Numeric Input?” is dis-
played in column (1) of the mail confirmation menu screen,
press switch F6 again. The input value will be sent out.
When the message “Do you send Numeric Input?” is dis-
played, if you press switch F5, the screen returns to the
screen for replying to message. At this time, the previous
input value will be cleared.
OPERATION EXPLANATION OF COMPONENTS
3-87