Komatsu PC210-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 153 / 522

REMARK
• (b) “Calendar” and (c) “Time” need to be readjusted
since they are reset after a long-term storage.
• When the “GPS Synchronization” is set to ON, they
can be automatically readjusted.
2.
Perform the following setup procedure by operating
switches F3 to F6 on the “Clock Adjustment” screen for se-
lecting a menu.
GPS SYNCHRONIZATION SETTING
On machines equipped with KOMTRAX, turning on “GPS Syn-
chronization” menu enables automatic setting of the monitor's
date and time in accordance with the clock of GPS.
F3: Moves to the next item (1 line below). Moves to the top line
when on the bottom line.
F4: Moves to the previous item (1 line above). Moves to the
bottom line when on the top line.
F5: Cancels change and returns to “Clock Adjustment” screen.
F6: Displays the setting screen for selected item.
REMARK
• When the machine is in the environment where the radio
waves from GPS cannot be received, such as inside of a
building, the automatic setting function may not work.
• While“GPS synchronization” menu is turned on, the menu
for “Calendar” (b) and “Time” (c) cannot be selected.
CALENDAR SETTING
Adjust the date of the monitor.
REMARK
As long as “GPS Synchronization” menu is turned on, “Calendar” menu is not selectable.
1.
Select “Calendar” (b) on “Clock Adjustment” screen, then
press switch F6.
2.
The “Calendar” screen is displayed.
When year display (A) is highlighted in yellow, operate the
switches as follows to change year display (A). If it is not
necessary to change the year setting, press switch F6.
F3: Calendar goes back 1 year.
F4: Calendar advances 1 year.
F5: Cancels change and returns the screen to “Clock Ad-
justment” screen.
F6: Proceeds to setting for month
OPERATION EXPLANATION OF COMPONENTS
3-79