4-8
A-63054 February 2004
Counter
During scanning, the scanner’s LCD display contains a counter that you can
set through Capture Software. As each page is scanned, the counter value
increases by one.
When you enable
New batch starts with counter equal to
, Capture Software
sets the starting counter to either the value specified or the document number
of the first document in the batch. By default, the counter will be set to “1” when
a new batch is created.
NOTE: The starting counter is set only when you manually create a new batch.
If batches are automatically created (e.g., blank page separation), the
counter value will increment across batches.
When this option is disabled, the counter will not be reset when a new batch is
created. The counter value will increase across batches.
NOTE: After powering up the scanner, the counter resets to zero. Therefore, if
the starting counter is not set when you create a new batch, counting
and imprinting will start at “0.”
A maximum of 72 characters can be printed on a page. Imprinting is done
vertically from the top of the paper. Character tops face the right of the paper
as shown in the print orientation diagram below.
10 mm
10 mm
Paper
Printing area
Start position
A
