A-63054 February 2004
9B-11
If you use the Split option, the documents must be folded according to the
following folding schemes:
When splitting images
, Capture Software always assumes the first image
(image 1 in the diagram above) is on the front after scanning.
Set the Auto-Rotate option (at the top of the
Page Setup
dialog box) correctly
depending on how you scan the document.
After split, images 1, 3, and 5 will be considered front images and images 2, 4,
and 6 will be considered rear images.
Because Capture Software immediately shows the result after merging or
splitting, you can test your page setup and make changes if necessary.
NOTES: Splitting images is not supported when color or grayscale scanning.
If you are scanning in simplex mode or from the flatbed, the split will
occur only on the front image. Only a two-image split is supported
with the with the following folding scheme:
Both image 1 and image 2 will be considered front images.
Splitting images is not available for Capture Software
Lite
for
i50/i60/i80 Scanners.
4
1
5
6
1
2
3
2
3
4
1
2
