A-63054 February 2004
9B-7
Check tab
Length
—select a length type from the drop-down list. Capture Software
checks the length of every scanned image and gives a warning (
Image too
short
or
Image too long
) when the image length does not comply with the
selected length type (i.e., is not between the minimum and maximum length).
The length check is useful for detecting document double-feeds. Selecting
All
disables Length Check.
Setup
—accesses the Image Length Setup dialog box. From this dialog box
you can modify existing Length Check templates, create new ones, or delete
Length Check templates.
NOTE: Minimum and maximum values are in 1/100-inch.
The Length Check is performed before auto-rotate, auto-auto-cropcrop, and
deskew, and prior to any splitting or merging that may take place.
Disabling the Check First Page option is useful when you scan envelopes
containing small transaction documents. Often the envelope is also scanned
as a header sheet and because of its larger size you do not want to check the
envelope’s size (the first page of a document) to prevent false warnings.
NOTES: Length checking is not available for Capture Software
Lite
for
i50/i60/i80 Scanners.
Since Length Checking is performed on the images directly received
from the scanner (i.e., prior to any auto-crop or deskew processing),
Length Checking is not really useful for the i50/i60/i80 Scanners. This
is because the scanner will always produce an image based on the
length specified in the Mask tab, regardless of the physical length of
each document scanned.
