A-63054 February 2004
3C-7
Creating a new batch
When you create a new batch, Capture Software will not disable the scanner.
From the Open Application window:
1. Select an application where you want the new batch to reside.
2. Click
New Batch
.
From the main Capture Software window:
3. Select
Batch>New
.
The Create New Batch dialog box appears.
4. Enter a new batch name in the
Batch
name field.
By default, Capture Software suggests a new batch name based upon the
last batch name created for the application (e.g., If the last batch name is
Batch002, then the new batch name default will be Batch003).
5. Enter the starting document number.
By default, Capture Software suggests a starting document number based
upon the Application Setup.
6. Click
OK
.
The main window appears with the batch name you assigned.
If document printing is enabled in Application Setup, the Set Counter
dialog box appears.
Enter a starting counter number.
The number will be downloaded and enabled on the first scanned page.
By default, with the exception of i200 Series Scanners, Capture Software
suggests a starting counter based upon the Application Setup.
For i200 Series Scanners, Capture Software keeps track of the counter
across scanned batches and will suggest a starting counter equal to
the counter of the last scanned page + 1. When Capture Software is
restarted, the suggested starting counter is reset to “1.”
7. Start scanning into the new batch.
