9A-10
A-63054 February 2004
Color Scanner 3590C only
page properties
The following properties are available only with the Color Scanner 3590C.
Start scanning in color
—when performing color scanning (front color,
rear black and white), select this icon to start the Color Scanner 3590C in
color mode.
Start scanning in black and white
—when performing black-and-white
scanning (both front and rear black-and-white), select this icon to start the
Color Scanner 3590C in black-and-white mode.
Color patch detection
When you scan with the Color Scanner 3590C, Capture Software enables
detection of the Kodak color patch document.
This patch document, when detected by the scanner, automatically
switches the scanner from color to black-and-white mode or black-and-white
to color mode.
This option is useful when scanning a mixture of color and black-and-white
documents. Another use for this feature is when you are scanning bar code
header sheets (which can be read only in black-and-white mode) followed by
color documents.
It is important to note that whenever the Color Scanner 3590C is stopped and
restarted in Capture Software, the scanner will always be restarted in the
mode defined in the selected Page Setup.
IMPORTANT: Therefore, if the scanner starts in color mode, is switched to
black-and-white mode via a patch, then is stopped (because of
a time-out condition, paper jam, user intervention, etc.), the
scanner will be restarted in color mode.
