9A-16
A-63054 February 2004
For complete details on image setup, see the section entitled “Using Image
Setup with the i800 Series Scanners.”
NOTES: For the i810 Scanner and i830 Scanner, only the bitonal page and
image setup options are available.
For dual-stream scanning, enable at least one bitonal image and
one color image.
When color scanning, bitonal scanning is still performed “behind
the scenes” using the grayed-out bitonal page and image
settings. Bitonal images will never be displayed or stored to
disk, but will be used, as necessary, to perform functions such
as blank page separation, bar code reading, etc.
When Toggle patch (also known as color on-the-fly) is enabled,
the page setup must be configured for bitonal-only or color-only
scanning in order for Toggle patch to take effect. For more
information, refer to the section entitled “Color on-the-fly using the
Toggle patch” in Chapter 4.
17. Select an image output order on the
Image order
drop-down list.
The image order specifies how images are displayed “on the fly” during
scanning and stored to disk. The default for dual-stream scanning is
Color Front, Bitonal Front, Color Rear, Bitonal Rear.
18. Select any merge and split options.
See the section entitled “Using the Merge and Split options” for setting up
and using these options.
19. Click
OK
when you are finished selecting all options.
NOTE: The
Delete
button deletes the selected page setup and removes it
from the list of page setups.
