Kikusui TOS9200, Руководство по эксплуатации

Страница: 95 / 172

TOS9200/9201 Basic Operations 3-57
it increases the safety of operations. Use of this function together with the optional
RC02-TOS (a remote-control box operated using both hands) further increases
safety.
The momentary function can be set using the SHIFT + F1 keys, regardless of the
location of the cursor. Each time the SHIFT + F1 keys are pressed, ON and OFF
alternate. The mark on the screen is to the left of MOMENTARY.
When the mark is to the left of MOMENTARY, settings can be made using the
rotary knob.
Turn the rotary knob clockwise : ON
Turn the rotary knob counterclockwise : OFF
When ON is set, items are highlighted.
Turning the FAIL mode ON/OFF (FAIL MODE)
When the FAIL mode is on, it is impossible to cancel a FAIL judgement or the pro-
tection status using the STOP signal by remote control.
To use the optional high-voltage test probe (HP01-TOS, HP02-TOS), turn on the
FAIL mode. When the test ends with a FAIL judgement, the tester’s FAIL status is
not cancelled even if you release your hand from the probe. To cancel the FAIL sta-
tus, press the STOP switch on the front panel.
The FAIL mode can be set using the SHIFT + F2 keys, regardless of the location of
the cursor. Each time the SHIFT + F2 keys are pressed, ON and OFF alternate. The
mark on the screen is to the left of FAIL MODE.
When the mark is to the left of MOMENTARY, settings can be made using the
rotary knob.
Turn the rotary knob clockwise : ON
Turn the rotary knob counterclockwise : OFF
SYSTEM 1 SYSTEM 1
MEAS MODE : NORM
PASS HOLD : 10.0s
OFF ON
F1 F2 F3 F4 F5
SHIFT
MOMEN
TARY
FAIL
MODE
DOUBLE
ACTION
MOMENTARY
FAIL MODE
DOUBLE ACTION