Kikusui TOS9200, Руководство по эксплуатации

Страница: 25 / 172

TOS9200/9201 Setup 1-3
1.2 Precautions for Installation
Be sure to observe the following precautions when installing the tester.
■
Do not use the tester in a f lammab le atmosphere .
T o pre v ent e xplosion or fi re, do not use the tester near alcohol, thinner , or other
comb ustible materials, or in an atmosphere containing such v apors.
■
A v oid locations where the tester is e xposed to high
temperatures or direct sunlight.
Do not locate the tester near a heater or in areas subject to drastic temperature
changes.
Operating temperature range: +5 °C to +35 °C (+41 °F to +95 °F)
Storage temperature range: -20 °C to +70 °C (-4 °F to +158 °F)
■
A v oid humid en vir onments.
Do not locate the tester in a high-humidity en vironment—near a boiler , humidi fi er ,
or w ater supply .
Operating humidity range: 20 % to 80 % RH
(no de w condensation permitted)
Storage humidity range: 90 % RH or less
(no de w condensation permitted)
Condensation may occur e v en within the operating humidity range. In that case, do
not start using the tester until the location is completely dry .
■
Do not place the tester in a corr osive atmosphere .
Do not install the tester in a corrosi v e atmosphere or one containing sulfuric acid
mist or the lik e. This may cause corrosion of v arious conductors and imperfect con -
tact with connectors, leading to malfunction and f ailure, or in the w orst case, a fi re.
■
Do not locate the tester in a dusty en vir onment.
Dirt and dust in the tester may cause electrical shock or fi re.
■
Do not use the tester where ventilation is poor .
This tester features a forced-air cooling system. Pro vide suf fi cient space for the air
inlet on the lateral side and the air outlet on the rear side to allo w air to fl o w .
■
Do not place the tester on a tilted surface or in a location
subject to vibrations.
If placed on a non-le v el surf ace or in a location subject to vibration, the tester may
f all, resulting in damage and injury .
■
Do not use the tester in locations aff ected b y str ong ma gnetic
or electric f ields.
Operation in a location subject to magnetic or electric fi elds may cause the tester to
malfunction, resulting in electrical shock or fi re.