Kikusui TOS9200, Руководство по эксплуатации

Страница: 160 / 172

8-12 Specifications TOS9200/9201
General Speci fi cations (TOS9200/TOS9201)
*7
This instrument is a Class I equipment. Be sure to ground the protective conductor terminal of the instrument. The
safety of the instrument is not guaranteed unless the instrument is grounded properly.
*8
Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or
surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except for an occasional
temporary conductivity caused by condensation.
Item Speci fi cations
Environment
Installation location Indoors at an altitude of up to 2 000 m
Warranty
range
Temperature 5 ˚ C to 35 ˚ C (41 ˚ F to 95 ˚ F )
Humidity 20 % to 80 % RH (No condensation)
Operating
range
Temperature 0 ˚ C to 40 ˚ C (32 ˚ F to 104 ˚ F)
Humidity 20 % to 80 % RH (No condensation)
Storage
range
Temperature -20 ˚ C to 70 ˚ C (-4 ˚ F to 158 ˚ F)
Humidity
90 % RH or less (No condensation)
Power requirements
Nominal voltage range
(Allowable voltage range)
100 V to 120 V AC / 200 V to 240 V AC (85 V to 130 V AC / 170 V to 250 V
AC) Selectable
Power con-
sumption
Using no load
(READY) 100 VA or less
Using the rated load Maximum of 800 VA
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance 30 M
Ω
or more (500 V DC) [between the AC LINE and chassis]
Withstanding voltage 1 500 V AC, 1 minute [between the AC LINE and chassis]
Earth continuity 25 A AC/0.1
Ω
or less
Safety Conforms to the requirements of the following standard.
IEC 61010-1:2001 (Class I (*7), Pollution Degree 2 (*8))
Dimensions See Fig. 8-1 Dimensions.
Weight Approx. 19 kg (Approx. 41.89 lbs)
Accessory
AC Power cord 1 pc.
High-voltage test leadwire TL01-
TOS (1.5 m) 1 set
Interlock jumper 1 pc.
High-Voltage Danger sticker 1 sheet
Fuse 1pc.
Operation Manual
Operation Manual for Tester: 1 copy,
Operation for GPIB/RS-232C Interface: 1 copy