TOS9200/9201
Controlling the TOS6200
5-5
K
e
y-loc
king the
T
OS6200
If the LOCAL k
e
y is pressed on the
T
OS6200 while it is running a program, the
tester enters the LOCAL mode and the test is suspended.
T
o pre
v
ent such an occurrence, it is recommended that the tester be k
e
y-lock
ed.
T
o
lock the panel settings, press the SHIFT + LOCAL/KEY LOCK k
e
ys.
On the panel, only the ST
AR
T switch and the ST
OP switch are v
alid. During k
e
y-
lock, “KEY LOCK” appears on the LCD.
T
o cancel the k
e
y-lock function, press the SHIFT + LOCAL/KEY LOCK k
e
ys.
Star
ting/suspending a test
T
o start a test, use the ST
AR
T switch on the
T
OS9200/9201.
T
o suspend a test, use the ST
OP switch on the
T
OS9200/9201.
If the ST
OP switch on the
T
OS9200/9201 f
ails to stop the
T
OS6200 due to a com
-
munication error between the
T
OS9200/9201 and the
T
OS6200, also press the
ST
OP switch on the
T
OS6200 to suspend the test.
5.3
Test Judgement
The
T
OS9200/9201 reads the test results of the
T
OS6200 and displays a judgement
on-screen.
F
AIL judg
ement b
y the
T
OS6200
When the
TOS9200/9201 or TOS6200 makes a FAIL judgement at any step of the
execution of a program, the program stops at that step regardless of whether the
repeat settings of the TOS9200/9201 program are made to RETURN or END, and
regardless of the preset interval time.
To cancel the FAIL status of a FAIL judgement in an earth continuity test, use the
STOP switch on the TOS9200/TOS9201.
PASS judgement by the TOS6200
With the interval time for each step set to any value other than HOLD, if a PASS
judgement is made for all steps, a PASS judgement is made for the program as a
whole. (This applies only to the repeat settings made to END.)
A PASS judgement is made after the interval time has elapsed for the last step. The
tester then returns to the READY status.
If the interval time is set to HOLD in any step, it is not possible to proceed to the
next step unless the START switch on the TOS9200/TOS9201 is pressed.
To suspend the test, press the STOP switch on the TOS9200/TOS9201. The tester
returns to the READY status.
Содержание TOS9200
