Kikusui TOS9200, Руководство по эксплуатации

Страница: 158 / 172

8-10 Specifications TOS9200/9201
Item Speci fi cations
SIGNAL
I/O
Input speci fi cations
High-level input voltage 11 V to 15 V Low active control of all input signals
The input terminal is pulled up by the resis-
tance to +12 V.
Opening the input terminal is equivalent to
inputting a high-level voltage.
Low-level input voltage 0 V to 4 V
Low-level input current Maximum of –5 mA
Input period Minimum of 5 ms
Output speci fi cations
Output method Open drain output (4.5 V to 30 V DC)
Output withstanding voltage 30 V DC
Output saturation voltage
Approximately 0.7 V (25 ˚ C)
Maximum output current 400 mA (TOTAL)
STATUS OUT Output terminal for the warning light
+ terminal (red) O24 V during the preset period with a maximum output current of
100 mA
- terminal (black) +24 V circuit common line
INTERLOCK input Cuts off output when the + and – terminals are opened, and enters the PRO-
TECTION status to disable testing
+ terminal (yellow) Interlock input + terminal Open: When the current between termi-
nals is 0.5 mA or less
- terminal (yellow) Interlock input – terminal Short-circuited: When the current
between terminals is 1 mA or more
SCANNER 8-pin MINI DIN connector on rear panel
Interface terminal for optional high-voltage scanner TOS9220/9221
RS-232C 9-pin D-SUB connector on rear panel (conforming to EIA-232-D)
Remote control possible for all functions other than POWER switch, KEY-
LOCK, and AUTO
Baud rates 9600 bps/19200 bps/38400 bps
TOS6200 interface
(only in AUTO mode)
START/STOP control, test-condition settings
Reads TOS6200 measurements and measurement results
GPIB Conforms to IEEE Std.488-1978
Remote control possible for all functions other than POWER switch, KEY-
LOCK, and AUTO
Function Subset Description
Source handshaking SH1 All functions provided
Acceptor handshaking AH1 All functions provided
Talker T6
All functions provided except for the
talk-only function
Expansion talker TE0 No function
Listener L4
All functions provided except for the lis-
ten-only function
Expansion listener LE0 No function
Service request SR1 All functions provided
Remote local RL1 All functions provided
Parallel port PP0 No function
Device clear DC1 All functions provided
Device trigger DT0 No function
Controller C0 No function
Electrical interface E1 Open collector