Kikusui KHA1000 Скачать руководство пользователя страница 87

Страница: 87 / 274

KHA1000

4-19

era

tio

4.5

Control to External Devices

This function is used to control the AC Power Supply. To enable it, select “Enabled”

for AC Pow. Control in the menu in the system setting display. When “Disabled” is

selected, all menus are displayed in a light-color and cannot be operated.

Showing External Control Display

Press the EXT CONT key.

The External control display appears.

Fig.4-9

External control display

Turning on the OUTPUT of the AC Power Supply using this

product

Turn on the OUTPUT of the AC Power Supply and prepare for starting a test.

Press the F4 key (AC Pow. Voltage Range) and set the AC Power

Supply output voltage range.

The setting should be in accordance with the rated power voltage of the EUT.

Press the F2 key (AC Pow. Output Volts) and set the AC Power Supply

output voltage.

The setting should be in accordance with the rated power voltage of the EUT.

Press the F3 key (AC Pow. Output Freq) and set the AC Power Supply

output frequency.

The setting should be in accordance with the rated power frequency of the EUT.

Press the F1 key (AC Pow. OUTPUT) to turn on the AC Power Supply

OUTPUT.

The icon in the upper part of the display shows a turned-on light bulb, and the AC

Power Supply OUTPUT goes on.

Содержание KHA1000



















































































































































































































































































Результаты поиска

Содержание KHA1000

Отзывы:

Kikusui KHA1000, Руководство по эксплуатации, Страница: 87 / 274

Результаты поиска

Содержание KHA1000

Отзывы: