Kikusui KHA1000, Руководство по эксплуатации, Страница: 40 / 274

2-10
KHA1000

Using the terminal cover
To prevent an electric shock, covers are attached to the LOAD and SOURCE
terminals. Use these terminals as shown in Fig.2-6.
Fig.2-6 Details on connecting LOAD and SOURCE terminals

Wire to be used, and its terminal treatment
Select the wire according to the input current of the EUT. Table 2-4 lists selection
standards. Similarly, select the wire to be used in the relay outlet. Use the relay
outlet with minimized wire length 1.5 m or shorter is recommended.
Table 2-4 Nominal cross-sectional area and allowable current for wire
Attach a cramping terminal to terminate the wire.
Use a cramping terminal that has a screw mounting part with a hole diameter of 6
mm and fits the wire.
Nominal cross-
sectional area
[mm
2
]
AWG
(Reference cross-
sectional area)
[mm
2
]
Allowable current
*1
[A]
(Ta = 30°C)
*1. Excerpt from Japanese laws related to electrical equipment.
Current
recommended by
Kikusui [A]
2 14 (2.08) 27 10
3.5 12 (3.31) 37 -
5.5 10 (5.26) 49 20
8 8 (8.37) 61 30
14 6 (13.3) 88 50
S pring washer (M6)
Knob
Terminal
cover
Cramping terminal
M6
Attach the terminal cover so that
a wire can be placed in this part.