Kikusui KHA1000, Руководство по эксплуатации, Страница: 241 / 274

KHA1000
8-49
8
R
em
o
te
C
o
n
tr
o
l
SYST:OPT
Queries the options installed on this product. The command works the same as *OPT?.
Command
SYSTem:OPTion?
Response
Returns the option name if an option is installed.
Returns
“0” if no option is installed.
SYST:REM (RS232C, USB only)
Sets the remote operation mode. Panel operation other than the LOCAL key is
locked. The command is an alternate command for the IEEE 488.1 REN message
(Remote Enable) and address specification.
The local operation mode is restored by SYST:LOC.
If this command is issued when GPIB is used, an SCPI error (-200, “Execution
error”) occurs.
Command
SYSTem:REMote
SYST:RWL (RS232C, USB only)
Sets the remote operation mode. Panel operation is locked (the LOCAL key cannot
be used either). This is an alternate command for the IEEE 488.1 llo message (Local
Lock Out).
The local operation mode is restored by SYST:LOC.
If this command is issued when GPIB is used, an SCPI error (-200, “Execution
error”) occurs.
Command
SYSTem:RWLock
SYST:BEEP:VOL
Sets the alarm volume.
Command
SYSTem:BEEPer:VOLume {<numeric>|MIN|MAX}
SYSTem:BEEPer:VOLume?
Parameter
Value: 0 to 8 (The default is 4.)
Response
Returns the alarm volume in the <NR3> format.