Kikusui KHA1000, Руководство по эксплуатации, Страница: 267 / 274

KHA1000
10-7
10
S
p
ec
ific
atio
n
s
Item Specifications
Environment Operating
environment Indoor, overvoltage category II
Operating
temperature range
0
o
C to 40
o
C (+32
o
F to +104
o
F)
Specification-
guaranteed
temperature
range
23
o
C ± 5
o
C (73±41
o
F)
Storage
temperature range
-20
o
C to 70
o
C (-4
o
F to +158
o
F)
Operating
humidity range 20 %rh to 80 %rh (no condensation)
Specification-
guaranteed
humidity range 20 %rh to 80 %rh (no condensation)
Storage humidity
range 90 %rh or less (no condensation)
Altitude Up to 2000 m
Safety Conforming to the following standard requirements:
IEC 61010-1:2001
Class I
*1
Pollution degree 2
*2
Outside dimensions Refer to Section 10.2 “ Outside Dimensions .”
Weight Approx. 8 kg (17.6 lb)
Accessories Power cord 1
Voltage sensing
terminal plug 1 (product shipped with this plug installed)
Voltage sensing
terminal short-
circuit wire kit 1 set (two wires: product shipped with these wires attached
to the voltage sensing terminal)
Voltage sensing
terminal plug
screwdriver 1
Spare fuse
2.5 A (T) 250 Vac 1 (in the power supply fuse holder)
Operation manual 1
*1. This is a Class I equipment. Be sure to ground this product’s protective conductor terminal. The
safety of this product is only guaranteed when the product is properly grounded.
*2. Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of
dielectric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive
pollution will occur except for an occasional temporary conductivity caused by condensation.