Kikusui KHA1000 Скачать руководство пользователя страница 158 | Manualshive

Страница: 158 / 274

Kikusui KHA1000 Скачать руководство пользователя страница 158

6-2

KHA1000

6.1

Setting IEC 61000-3-3 Test Conditions

Set test conditions in the Vf-Test Conditions List display. The conditions are also
used for the Vf-Observation and Test Conditions displays.

Fig.6-1

Vf-Test Conditions List View IEC Ed2.0/Ed1.1

Showing the Vf-Test Conditions List display

Press the Vf key.
The Vf key LED illuminates and the Vf-Test Conditions List display appears.
While the test status shown on the upper left of the display

is “Test” or “Analysis,”

the mode cannot be changed. The dialog box message “Can’t execute during test/
analysis. Please operate it after ending” is displayed.
In this case, press the VIEW key to turn off its LED. Select “Exit” from the

displayed menu.

Test conditions can be set during measurement.

Set test conditions in the Vf-Observation and Test Conditions display. The
measurement display is set in the Vf-Observation and Analysis display (Vf-VIEW)
and use the same menu in the Vf-Test Conditions List window.



View selection and transition

1.

Press the Vf key.

The Vf key LED illuminates, and the Vf-Test Conditions List display appears.

2.

Press the VIEW key.

The VIEW key LED illuminates, and the Vf-Observation and Analysis display (Vf-
VIEW) appears.

See

«
...
156
157
158
159
160
...
»

Содержание KHA1000



















































































































































































































































































Отзывы:

Нет отзывов