Kikusui KHA1000, Руководство по эксплуатации, Страница: 43 / 274

KHA1000
2-13
2
In
sta
lla
tio
n
a
n
d
P
re
p
ara
tio
n
fo
r U
se
2.5 Connecting the Test System
Use the Line Impedance Network in harmonic current tests (JIS C61000-3-2(2019),
JIS C61000-3-2(2005) and JIS C610003-2(2003)) and a voltage fluctuation test (IEC
61000-3-3 (Ed2.0)).
The impedance is not used in IEC 61000-3-2 (Ed5.0), IEC 61000-3-2 (Ed3.0), and
IEC 61000-3-2 (Ed2.2). In JIS C61000-3-2(2003), the impedance is always used. In
JIS C61000-3-2(2005) and JIS C61000-3-2(2019), the impedance may be used if
test results have variations (optional). In a voltage fluctuation test (IEC 61000-3-3
(Ed2.0)), the impedance is used to measure current fluctuations that are generated
by voltage fluctuations and flicker.
•
To prevent an electric shock, be sure to remove the power cord of a
devices used in a test system or turn off the POWER switch.

Setting line impedance values
•
PCR-WE cannot be combined with a standard line impedance network. For the
line impedance network for PCR-WE, contact your Kikusui distributor or agent.
WARNING
Standard Setting Line Impedance Network
IEC 61000-3-2(Ed5.0)
IEC 61000-3-2(Ed3.0)
IEC 61000-3-2(Ed2.2)
Bypass (THRU)
*1
*1. Bypass (THRU) for the LIN1020JF Line Impedance Network
OUT (THRU) for the LIN40MA-PCR-L
JIS C61000-3-2(2005)
JIS C61000-3-2(2019)
Bypass (THRU)
*1
,
or
Z1(0.4

+ 0.37 mH): Nominal voltage 100 V (single phase)
Z2(0.38

+ 0.46 mH): Nominal voltage 200 V (single phase)
JIS C61000-3-2(2003)
Z1(0.4

+ 0.37 mH): Nominal voltage 100 V (single phase)
Z2(0.38

+ 0.46 mH): Nominal voltage 200 V (single phase)
IEC 61000-3-3(Ed2.0) 0.4

+ j0.25
