Kikusui KHA1000, Руководство по эксплуатации, Страница: 239 / 274

KHA1000
8-47
8
R
em
o
te
C
o
n
tr
o
l
TRIG:SEQ2:LEV
TRIG:RUSH:LEV
Each sets the current trigger level for in-rush current measurement.
Command
TRIGger:SEQuence2:LEVel {<numeric>|MIN|MAX}
TRIGger:SEQuence2:LEVel?
TRIGger:RUSH:LEVel {<numeric>|MIN|MAX}
TRIGger:RUSH:LEVel?
Parameter
Value:
0.1 to 80 (The default is 0.1.)
Unit:
A
When *RST is sent, settings are made as shown in Table 8-4.
Response
Returns the current trigger level in the <NR3> format.
TRIG:SEQ3:SOUR
TRIG:TEST:SOUR
Each sets the conditions for actually starting measurement for test operation after
reception of the INIT:SEQ3 command.
Command
TRIGger:SEQuence3:SOURce {BUS|INTernal}
TRIGger:SEQuence3:SOURce?
TRIGger:TEST:SOURce {BUS|INTernal}
TRIGger:TEST:SOURce?
Parameter
Value: BUS Start measurement after waiting for a software trigger
(*TRG, IEEE488.1 get (Group Execute Trigger)).
IMMediate Start measurement immediately (Default)
When *RST is sent, settings are made as shown in Table 8-4.
Response
Returns the current setting of the trigger source.
To start the second or a subsequent test in MANual mode set by the VF:METH
command (d measurement, voltage fluctuation test), use a software trigger (*TRG,
IEEE 488.1 get) regardless of the setting of TRIG:SEQ3:SOUR (TRIG:TEST:SOUR).