Kikusui KHA1000, Руководство по эксплуатации, Страница: 24 / 274

1-2
KHA1000
1.1 About This Manual
Firmware version of the product to which this manual applies
This manual applies to products with firmware version 2.0x installed.
Page 4-2
For product inquiries, please provide us with the following:
• Model name (indicated on the front page of this manual)
• Firmware version
• Serial No. (indicated in the lower part on the back of the product)
1.2 Overview
This product can measure harmonics current, flicker, or voltage fluctuations. It can
execute tests that conform to IEC and JIS standards, in combination with the AC
Power Supply and Line Impedance Network.
This product displays measured values in various display modes in real time. It can
make evaluations, pass/failure decisions, and analyses by conformance test.
Because the AC power supply
1
can be controlled from this product, a test system
can be configured without a personal computer being used. This product can also be
used independently as a power analyzer.
1.2.1 Conforming Standards
This product conforms to the standards listed in Table 1-1 . The “Standard name
notations” in the table are the symbols used in this product, and indicate the relevant
standards for limit values and measuring techniques. Figure 1-2 indicates the rules
for these notations.
See
1. There are restrictions on the use of PCR-WE. This product cannot directly control PCR-WE.
To use PCR-WE, the separately sold application software SD005-KHA Harmonics Explorer is
required.