Kikusui KHA1000 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 274

Kikusui KHA1000 Скачать руководство пользователя страница 70

4-2

KHA1000

4.1

Turning On the Power

4.1.1

Turning on the POWER Switch

When the power is turned on, the firmware version is displayed for several seconds,
and if no problems are found by the internal check, the harmonic current test display
(HA-test conditions list display) appears. Allow for sufficient warm-up time before
starting a test.

1.

Check that the POWER switch is OFF (O).

2.

Insert the plug from the power cord into the outlet.

3.

Turn the POWER switch to ON ( ).

Depress the POWER switch ( ). With the startup sound, all LEDs illuminate and the
firmware version is displayed.

4.

Check the firmware version on the screen.

After the firmware version shown in Fig.4-1 is displayed for several seconds, the
harmonic current test display (HA-Observation and Analysis display) appears.

When the Ethernet port (factory option) is mounted, “with Ethernet” is displayed under

the firmware version.

Fig.4-1

Firmware version example

«
...
68
69
70
71
72
...
»

Содержание KHA1000



















































































































































































































































































Отзывы:

Нет отзывов