Kikusui KHA1000, Руководство по эксплуатации, Страница: 5 / 274

KHA1000
iii
Grounding
• This product is an IEC Safety Class I equipment (equipment with a
protective conductor terminal). To prevent the possibility of electric
shock, be sure to connect the protective conductor terminal of the
product to electrical ground (safety ground).
Installation
• This product is designed to secure safety for indoor usage. Be sure to
use it indoors.
• When installing this product, follow section 2.2, "Notes on Installation
Location", in the Operation Manual.
Relocation
• Before relocating this product, turn off the POWER switch and remove
the wiring and cables.
• When relocating this product, be sure to include the Operation
Manual.
Operation
• Before using this product, check that the input power voltage, fuse
rating, and power cord appearance are normal. Be sure to remove the
power cord plug from the outlet before checking.
• If a product malfunction or abnormality is detected, stop using it
immediately, and remove the power plug from the outlet. Make sure
the product is not used until it is completely repaired.
• Connection lines through which current flows, such as output and load
wiring, should be selected from those with a margin for the current
capacity.
• Do not disassemble or modify this product. If modification is needed,
contact the store from which the product was purchased, or your
Kikusui distributor/agent.
Maintenance
and
inspection
• Before conducting maintenance and inspection, be sure to remove the
power cord from the outlet to prevent an electric shock.
• Do not remove the external cover during maintenance or inspection.
• Periodic maintenance, inspection, cleaning, and calibration are
recommended to maintain the performance and safe operation of the
product.
Adjustment
and repair
• Kikusui service engineers will perform internal adjustment and repair
of the product. If the product needs adjustment or repairs, contact your
Kikusui distributor/agent.
G N L
Check?