Kiepe Elektrik SEG, Руководство по эксплуатации

Страница: 53 / 72

53
Operating Instructions SEG
6 Maintenance
7. With the conveyor system switched on, check that
switching elements ( 5 , 6 ) and signal lamp ( 12 ) are
working properly (see Figure 6-7 and the documen-
tation on the conveyor system) .
The following table shows the status of switching
elements (
5 , 6 ) in their respective reset lever ( 2 )
switch positions (see Fig. 6-6) .
Switch posi-
tion of reset
lever (2)
Switching element
N/C contact (5)
(:21,:22),(:41,:42),
(:61,:62)
Safety circuit
N/O contact (6)
(:13,:14),(:33,:34),
(:53,:54)
Control circuit
1 (pull-rope
emergency stop
switch active) Closed Open
0 (pull-rope
emergency stop
switch trig-
gered) Open Closed