Kiepe Elektrik SEG, Руководство по эксплуатации

Страница: 56 / 72

56
SEG Operating Instructions
7 Repairs
7.3 Replacing the dummy plug
To replace dummy plug ( 10 ) proceed as follows (see
Fig. 7-2) :
1. Before starting work, isolate the system from the
power supply. Secure the system from being
switched on again. Cover any adjacent, live parts so
that they cannot be touched.
2. If necessary, clean the pull-rope emergency stop
switch from outside (see Section 6.4, page 47) .
3. Screw dummy plug ( 10 ) out of housing ( 3 ).
Danger of death if the safety instructions are
not observed!
Always observe the safety measures and general in-
structions described in
Chapter 1: „Safety“, page 7 .
Warning - danger due to transport, storage,
and disposal!
Always observe the safety measures and general in-
structions described in
Chapter 2: „Transport, storage,
and disposal“, page 15 .
Risk of death from electrical shock!
Only an electrician may work on the device.
Before starting work, isolate the system from the power
supply. Secure the system from being switched on
again. Cover any adjacent, live parts so that they can-
not be touched.
!
!
Fig. 7-2: Replacing the dummy plug
10
3