Kiepe Elektrik SEG, Руководство по эксплуатации

Страница: 47 / 72

47
Operating Instructions SEG
6 Maintenance
6.4 Cleaning the device from the outside
6.4.1 Removing dirt from the outside
To clean the pull-rope emergency stop switch from out-
side, proceed as follows:
1. Before starting work, isolate the system from the
power supply. Secure the system from being
switched on again. Cover any adjacent, live parts so
that they cannot be touched.
2. Remove the pull-rope from trigger lever ( 1 ). Observe
the instructions in the documentation on the pull-
rope system.
Danger of death if the safety instructions are
not observed!
Always observe the safety measures and general in-
structions described in
Chapter 1: „Safety“, page 7 .
Risk of death from electrical shock!
Only an electrician may work on the device.
Before starting work, isolate the system from the power
supply. Secure the system from being switched on
again. Cover any adjacent, live parts so that they can-
not be touched.
!
Warning - risk of injuries when the release
line is disconnected!
The release line is under spring tension. Carefully dis-
connect the release line from the release lever so that
the release line cannot spring back uncontrollably. Ob-
serve the documentation for the release line system.
!
Fig. 6-3: Cleaning
2 1