Kiepe Elektrik SEG, Руководство по эксплуатации

Страница: 49 / 72

49
Operating Instructions SEG
6 Maintenance
2. Remove the pull-rope from trigger lever ( 1 ). Observe
the instructions in the documentation on the pull-
rope system.
3. To remove any ice that could block trigger lever ( 1 )
and reset lever ( 2 ), actuate trigger lever ( 1 ) and
reset lever ( 2 ) several times.
Do not use any cleaning agents that contain sol-
vents or any knives or sharp-edged tools.
4. Carry out a function test (see Section 6.5: „Func-
tional test", page 50) .
5. Mount the pull-rope on trigger lever ( 1 ). When the
pull-rope has been mounted, trigger lever ( 1 ) must
be in a vertical position. Observe the instructions in
the documentation on the pull-rope system.
Beware!
The surfaces of the device and the seals must not be
damaged by the removal of ice.
Do not use any cleaning agents which contain solvents.
Do not use any knives or sharp-edged tools.
Fig. 6-4: Cleaning
2 1
!