Kiepe Elektrik SEG, Руководство по эксплуатации

Страница: 41 / 72

41
Operating Instructions SEG
5 Mounting and dismounting
5.5 Dismounting
To dismount the pull-rope emergency stop switch, pro-
ceed as follows:
1. Preparatory work
2. Detaching the electrical connections
3. Mechanical dismounting
5.5.1 Preparatory work
1. Before starting work, isolate the system from the
power supply. Secure the system from being
switched on again. Cover any adjacent, live parts so
that they cannot be touched.
2. Remove the pull-rope from trigger lever ( 1 ). Observe
the instructions in the documentation on the pull-
rope system
(see Fig. 5-6) .
3. Undo the screws ( 9 ) and remove the cover ( 4 ) (see
Fig. 5-7) .
Danger of death if the safety instructions are
not observed!
Always observe the safety measures and general in-
structions described in
Chapter 1: „Safety“, page 7 .
Warning - danger due to transport, storage,
and disposal!
Always observe the safety measures and general in-
structions described in
Chapter 2: „Transport, storage,
and disposal“, page 15 .
!
!
Risk of death from electrical shock!
Only an electrician may work on the device.
Before starting work, isolate the system from the power
supply. Secure the system from being switched on
again. Cover any adjacent, live parts so that they can-
not be touched.
Warning - risk of injuries when the release
line is disconnected!
The release line is under spring tension. Carefully dis-
connect the release line from the release lever so that
the release line cannot spring back uncontrollably. Ob-
serve the documentation for the release line system.
!