Keysight Technologies N5171B EXG, Руководство пользователя

Страница: 91 / 473

Keysight EXG and MXG X-Series Signal Generators User’s Guide 75
Optimize Performance
Using the Dual Power Meter Display
13. On the signal generator: Press Channel B to On and then back to Off again. This initializes the
signal generator to the external power meter.
14. Press Return > Zero Sensor
A diagnostic dialog box is displayed each time an external power meter is being used and the
Zero Sensor or Calibrate Sensor softkey is pressed (refer to Figure 4-10 on page 75 ).
Verify the power sensor is connected to the 50 MHz reference of the power meter.
Figure 4-10 Diagnostic Dialog Box for Channel B
15. Press Done
The
Running Calibration(s)
bar is displayed:
Zeroing Sensor Please wait...
.
16. After Running Calibration(s) bar disappears: Press Calibrate Sensor
Diagnostic Dialog box is displayed that prompts for verifying the connection of the power
sensor to the power meter 50 MHz reference (refer to Figure 4-11 on page 75 ).
Figure 4-11 Diagnostic Dialog Box for Calibration
For details on
each key, use key
help as described
on
page 40
.
For details on
each key, use key
help as described
on
page 40
.