Keysight Technologies N5171B EXG Скачать руководство пользователя страница 144

Страница: 144 / 473

128 Keysight EXG and MXG X-Series Signal Generators User’s Guide

Avionics VOR/ILS (Option 302)
Using COM/ID Softkeys

(Optional) Select a <value> from 0 Hz to 20 kHz.

Set the COM/ID tone AM depth.

Press Depth

(Default value is 10%.)

(Optional) Select a <value> from 0 to 49.9% and press Enter.

Set the COM/ID mode to on.

Press COM/ID

(Default is COM/ID Off.)

Select COM/ID On

Set modulation to on.

Press MOD On and verify that the front panel LED is illuminated,

indicating that it is on.

(Default is on).

Set a desired RF power level.

Press Amptd

(Default value is around -144 dBm, and depends on the signal

generator model being used, so the signal may be very low and hard

to find if you do not specify a high enough power level.)

Select a value from -20 dBm to -40 dBm.

Set RF output to on.

Press RF On and verify that the front panel LED is illuminated,

indicating that it is on.

(Default is off).

10.

Verify that all settings are as expected on the signal generator display.

Press Aux Fctn > Avionics > VOR

Review the settings on the right-side of the display.

Содержание N5171B EXG


























































































































































































































































































































































































































































































Результаты поиска

Содержание N5171B EXG

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies N5171B EXG, Руководство пользователя

Результаты поиска

Содержание N5171B EXG

Отзывы:

Бренды по названию

Популярные бренды