Keysight Technologies N5171B EXG, Руководство пользователя

Страница: 237 / 473

Keysight EXG and MXG X-Series Signal Generators User’s Guide 221
Basic Digital Operation (Option 653/655/656/657)
Triggering a Waveform
— Segment Advance mode plays a segment in a sequence only if triggered. The trigger source
controls segment–to–segment playing (see Example: Segment Advance Triggering on page
222). A trigger received during the last segment loops play to the first segment in the sequence.
— Gated mode triggers the waveform at the first active triggering state, then repeatedly starts and
stops playing the waveform in response to an externally applied gating signal. See Example:
Gated Triggering on page 223.
Trigger Source
External Trigger Polarity
— In Continuous, Single, and Segment Advance modes, use the Ext Polarity softkey to set the
external trigger polarity.
— In Gated mode, the Active Low and Active High softkeys ( page 220 ) determine the external
trigger polarity.
Mode >
Dual ARB >
Trigger Source
Patt Trig In BNC connector
(see
page 16
)
Aux I/O connector
(see
page 17
)
Neg = the signal generator
responds during the trigger signal
low state.
Pos = the signal generator
responds during the trigger signal
high state.
For details on each key, use key help
as described on
page 40
.
Key inactive until Ext
Delay is enabled On.