Keysight Technologies N5171B EXG, Руководство пользователя

Страница: 128 / 473

112 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Optimize Performance
Using a USB Keyboard
Using a USB Keyboard
You can use a USB keyboard to remotely control the RF output state, the modulation state, and to
select a memory sequence and register.
The register selection, RF output state, and modulation state are affected by power cycle or preset,
but the USB keyboard control state and the sequence selection are not.
To avoid the loss of data, GPIB settings, or current user instrument states
that have not been permanently saved to nonvolatile memory, the signal
generator should always be powered down either via the instrument’s
front panel power button or the appropriate SCPI command. Signal
generators installed in rack systems and powered down with the system
rack power switch rather than the instrument’s front panel switch display a
Error –310 due to the instrument not being powered down correctly.
Turning the USB keyboard control off disables the USB
keyboard; it has no effect on the Auto Recall softkeys.
For details on each key, use key help as described on
page 40
.
USB Keyboard Key
Delete, Enter
Insert
Home, Right Arrow
End, Left Arrow
Page Up, Up Arrow, +
Page Down, Down Arrow, –
Signal Generator Function
RF On/Off
Mod On/Off
Next Sequence
Previous Sequence
Recall Next State Register
Recall Previous State Register
Deletes every register in every sequence.
NOTE: You cannot recover the registers after
deleting them.