manualshive.com logo in svg

IOtech MultiScan 1200, Руководство пользователя

Поделиться
Скачать
IOtech MultiScan 1200 Скачать руководство пользователя страница 159

TempScan / MultiScan User's Manual

Chapter 10: PostView     149

It is a simple task to create a chart display configuration using the automatic method.  The following
steps apply to this feature of 

Chart Setup Wizard

.

Note:

If PostView locates a display configuration file, 

Chart Setup Wizard

 will not be activated.

1. From the 

Chart Setup Wizard

 window, select the desired mode (Simple, Moderate, or Advanced).

Note:

Selecting 

Manual Chart Creation, Create Charts

 bypasses the 

Chart Setup Wizard

 and enters

a manual editing mode.  This option makes use of PostView’s Display Configuration feature
discussed in the following section, 

Display Configuration

.

2. Use the pull-down arrows (

τ

), or use the cursor and type in a new value to make selections for the

number of groups, charts, and channels as applicable.

3. If you desire to start with a channel other than channel 1, use the pull-down arrow and select the

desired starting channel number.

4. When your setup is complete, click on the 

Create Charts

 button.  A percentage of completion bar

will appear, followed by the PostView window.

The channels in the setup you create will appear in chart form on PostView’s window.  The Channels
will overlap on their assigned Chart (for configurations making use of multiple channels per chart), and
will be visible when the applicable Group is selected.  Note that only one group of charts can be viewed
at a time.

Display Configuration Setup

Note:

When PostView does not find a display configuration file it automatically opens the 

Chart

Setup Wizard

.  You can use this feature to automatically create a display configuration.  You

also have the option of selecting 

Manual Chart Creation, Create Charts

 to bypass the 

Chart

Setup Wizard

 and enter the manual editing mode, as discussed in this section.

The Display Configuration button accesses a 

Display Configuration Setup

 dialog box.  This box will

also be displayed if:

•

 

Manual Chart Creation, Create Charts is selected from the Wizard Chart Setup window

•

 

You select Setup from the File pull-down menu

•

 

You right-click on the chart region in PostView’s window

Note:

If multiple chart groups are present in the display configuration, the current group will be
selected in the display configuration tree.

When you first click on the Display Configuration button, a 

Display Configuration Setup

 box appears.

A display region shows the configured structure of the groups, charts, and channels.  From this box you
can select the number of charts to be assigned to a specific group.  With the use of the mouse cursor
you can also select a chart or channel for additional editing.

The rest of this section has been divided into two parts.  The first pertains to editing an existing display;
while the second section pertains to manually creating a display configuration from scratch, i.e., there is
no existing display configuration to edit.  Both methods make use of 

Display Configuration Setup

dialog boxes.

Содержание MultiScan 1200













































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды