IOtech MultiScan 1200, Руководство пользователя

Страница: 121 / 364

TempScan / MultiScan User's Manual Chapter 9: TempView 111
Acquire Menu Items
Acquire Menu Items
Arm Acquisition (Ctrl + T)
(12)
Initiates a Trigger scan in an acquisition of data to disk. The Arm Acquisition command is typically the
first step after acquisition configuration has been completed. When this item is selected, one of three
cases can follow:
•
Pre-Trigger is not defined: The Trigger option in the Trigger Event area
(a)
of the Acquisition
Configuration dialog box will determine when the acquisition process is initiated.
•
Pre-Trigger is defined: The acquisition process begins when the Arm Acquisition item is selected.
•
Trigger is the keyboard: If a keystroke is chosen as the trigger, the Console Trigger dialog box
will appear when the Arm Acquisition item is selected.
Console Trigger Dialog Box
(If trigger is keyboard, Acquire > Arm Acquisition)
Disarm… (Ctrl + Y)
(13)
Deactivates the acquisition of data at any point during an active acquisition. The Disarm the
Acquisition dialog box appears when this item is selected.
Disarm the Acquisition Dialog Box
(Acquire > Disarm…)
Configure Acquisition… (Ctrl + C)
(11)
Sets parameters used by the Arm Acquisition command for the acquisition of data to disk. When the
Trigger is satisfied, the scans are collected at the selected scan frequency and stored to disk in the
designated file. The Acquisition Configuration dialog box will appear when the menu item is selected,
and its appearance will be slightly different depending on whether it is accessed via TempScan/1100
mode, MultiScan/1200
Normal mode, or MultiScan/1200 High-Speed mode.