Intellinet 560931 Скачать руководство пользователя страница 91

Страница: 91 / 281

Configuration Revision

The revision of the MSTI configuration named above. This must be an integer between 0 and 65535.

MSTI Mapping

MSTI

The bridge instance. The CIST is not available for explicit mapping, as it will receive the VLANs not
explicitly mapped.

VLANs Mapped

The list of VLANs mapped to the MSTI. The VLANs must be separated with a comma and/or space. A
VLAN can only be mapped to one

MSTI. An unused MSTI should just be left empty (I.e., not having any

VLANs mapped to it).

Buttons

Save:

Click to save changes.

Reset:

Click to undo any changes made locally and revert to previously saved values.

4.7.3 Spanning Tree / MSTI Priorities

This page allows you to inspect the current STP MSTI bridge instance priority configurations, and possibly
change them, as well.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды