Intellinet 560931, Руководство пользователя

Страница: 23 / 281

23
Provide the IPv6 gateway address of this switch. The IPv6 address is in 128-bit records represented as
eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
“fe80::215:c5ff:fe03:4dc7.”
The symbol :: is a special syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It can also represent a legally valid IPv4
address. For example, “::192.1.2.34.”
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Renew: Click to renew IPv6 AUTOCONF. This button is only available if IPv6 AUTOCONF is enabled.
4.1.4 NTP Configuration:
NTP is short for Network Time Protocol. Network Time Protocol (NTP) is used to synchronize time
clocks on the Internet. You can configurethe NTP Server’s IP address here to synchronize the clocks of
the remote time server on the network.
This page indicates the NTP mode operation:
Mode
Possible modes:
Enable NTP mode operation. When NTP mode operation is enabled, the agent forwards NTP messages
between the clients and the server when they are not on the same subnet domain.
Disable NTP mode operation.
Server #
Provide the NTP IPv4 or IPv6 address of this switch. The IPv6 address is in 128-bit records represented
as eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
“fe80::215:c5ff:fe03:4dc7.” The symbol :: is a special syntax that can be used as a shorthand way of