Intellinet 560931 Скачать руководство пользователя страница 228

Страница: 228 / 281

228

server.

Unknown Types

radiusAccClientExtUnknow

nTypes

The number of RADIUS packets of

unknown types that were received from the

server on the accounting port.

Packets

Dropped

radiusAccClientExtPackets

Dropped

The number of RADIUS packets that were

received from the server on the accounting

port and dropped for some other reason.

Requests

radiusAccClientExtRequests

The number of RADIUS packets sent to the

server. This does not include

retransmissions.

Retransmissions

radiusAccClientExtRetrans

missions

The number of RADIUS packets

retransmitted to the RADIUS accounting

server.

Pending

Requests

radiusAccClientExtPending

Requests

The number of RADIUS packets destined

for the server that have not yet timed out or

received a response. This variable is

incremented when a Request is sent and

decremented due to receipt of a Response,

timeout, or retransmission.

Timeouts

radiusAccClientExtTimeouts

The number of accounting timeouts to the

server. After a timeout, the client may retry

to the same server, send to a different

server, or give up. A retry to the same

server is counted as a retransmit as well as

a timeout. A send to a different server is

counted as a Request as well as a timeout.

Other Info

This section contains information about the state of the server and the latest round-trip time.

Name

RFC4670 Name

Description

State

Shows the state of the server. It takes one of the following values:

Not Ready:

Disabled

: The selected server is disabled.

Not Ready:

The server is enabled, but IP communication is not yet

up and running.

aReady:

The server is enabled, IP communication is up and

running, and the RADIUS module is ready to accept accounting

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды