Intellinet 560931 Скачать руководство пользователя страница 84

Страница: 84 / 281

TCP/UDP

Port Number

The TCP/UDP port number can be used to calculate the destination port for the frame. Check to enable

the use of the TCP/UDP Port Number, or uncheck to disable. By default, TCP/UDP Port Number is

enabled.

Aggregation Group Configuration

Group ID

Indicates the group ID for the settings contained in the same row. Group ID "Normal" indicates there is no

aggregation. Only one group ID is valid per port.

Port Members

Each switch port is listed for each group ID. Select a radio button to include a port in an aggregation, or

clear the radio button to remove the port from the aggregation. By default, no ports belong to any

aggregation group. Only full duplex ports can join an aggregation and ports must be in the same speed in

each group.

Buttons

Save:

Click to save changes.

Reset:

Click to undo any changes made locally and revert to previously saved values.

4.5.2 LACP - Dynamic Aggregation

This page allows the user to inspect the current LACP port configurations, and possibly change them, as
well.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды