Intellinet 560931, Руководство пользователя

Страница: 32 / 281

32
Group Name
The name identifying the privilege group. In most cases, a privilege level group consists of a single
module (e.g., LACP, RSTP or QoS), but a few of them contain more than one.
The following description defines these privilege level groups in details:
System: Contact, Name, Location, Time zone, Log.
Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the
MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection and IP source guard.
IP : Everything except “ping.”
Port : Everything except “VeriPHY.”
Diagnostics : “ping” and '”VeriPHY.”
Maintenance : CLI-System Reboot, System Restore Default, System Password, Configuration Save,
Configuration Load and Firmware Load. Web-Users, Privilege Levels and everything in Maintenance.
Debug : Only present in CLI.
Privilege Levels
Every group has an authorization Privilege level for the following subgroups: configuration read-only,
configuration/execute read-write, status/statistics read-only, status/statistics read-write (e.g., for clearing
statistics).
User Privilege should be the same or greater than the authorization Privilege level to have the access to
that group.
Insufficient Privilege Level: If you log in with a lower-level privilege and try to access the higher
privilege level configuration feature, the message Insufficient Privilege Level will appear. If you want to
continue, be sure that you have the privilege.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.