Intellinet 560931 Скачать руководство пользователя страница 192

Страница: 192 / 281

192

System Uptime

The period of time the device has been operational.

Software Version

The software version of this switch.

Software Date

The date when the switch software was produced.

Buttons

Auto-refresh :

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh :

Click to refresh the page; any changes made locally will be undone.

6.1.1.2 CPU Load

This page displays the CPU load, using an SVG graph.

The load is measured as averaged over the last 100 ms, 1 sec and 10 second intervals. The last 120

samples are graphed, and the last numbers are displayed as text, as well.

In order to display the SVG graph, your browser must support the SVG format. Consult the SVG Wiki

for more information on browser support. Specifically, at the time of this writing, Microsoft Internet

Explorer will need to have a plugin installed to support SVG.

Buttons:

Auto-refresh :

Check this box to enable an automatic refresh of the page at regular intervals.

6.1.1.3 System Log Information

The switch system log information is provided here.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды