Intellinet 560931 Скачать руководство пользователя страница 237

Страница: 237 / 281

237

6.1.4.2 LACP Port Status

This page provides a status overview for LACP status for all ports.

Port

The switch port number.

LACP

“Yes” means that LACP is enabled and the port link is up. “No” means that LACP is not enabled or that

the port link is down. “Backup” means that the port could not join the aggregation group, but will join if

another port leaves the group. Meanwhile, its LACP status is disabled.

Key

The key assigned to this port. Only ports with the same key can aggregate together.

Aggr ID

The Aggregation ID assigned to this aggregation group.

Partner System ID

The partner's System ID (MAC address).

Partner Port

The partner's port number connected to this port.

Buttons

Refresh:

Click to refresh the page immediately.

Auto

refresh

Click this box to enable an automatic refresh of the page at regular intervals.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды