Intellinet 560931 Скачать руководство пользователя страница 224

Страница: 224 / 281

224

to accept access attempts.

Dead (X seconds left)

: Access attempts were made to this server, but it did not reply within the

configured timeout. The server has temporarily been disabled, but will get re-enabled when the

dead-time expires. The number of seconds left before this occurs is displayed in parentheses. This

state is only reachable when more than one server is enabled.

RADIUS

Accounting

Servers

The RADIUS server number. Click to navigate to detailed statistics for this server.

IP Address

The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this server.

State

The current state of the server. This field takes one of the following values:

Disabled:

The server is disabled

Not Ready:

The server is enabled, but IP communication is not yet up and running.

Ready:

The server is enabled, IP communication is up and running, and the RADIUS module is ready

to accept accounting attempts.

Dead (X seconds left)

: Accounting attempts were made to this server, but it did not reply within the

configured timeout. The server has temporarily been disabled, but will get re-enabled when the

dead-time expires. The number of seconds left before this occurs is displayed in parentheses. This

state is only reachable when more than one server is enabled.

Buttons

Auto-refresh:

Click this box to enable an automatic refresh of the page at regular intervals.

Refresh:

Click to refresh the page immediately.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды