Intellinet 560931, Руководство пользователя

Страница: 173 / 281

173
Static Aggregation Configuration
Aggregation Group
Configuration
Syntax:
Aggr Add <port_list> [<aggr_id>]
Example: Add port 5-8 to Group 1
>aggr add 5-8 1
>aggr del 1 (Delete the group 1)
Hash Code
Contributors
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
smac = Source MAC Address
dmac = Destination MAC Address
ip = IP Address
port = TCP/UDP Port Number
Example: Only the Source MAC Hash is enabled. The rest of
the modes are disabled.
>agg mode smac en
>agg mode dmac dis
>agg mode ip dis
>agg mode port dis
LACP
LACP Port
Configuration
Syntax:
LACP Configuration [<port_list>]
LACP Mode [<port_list>] [enable|disable]
LACP Key [<port_list>] [<key>]
LACP Role [<port_list>] [active|passive]
LACP Status [<port_list>]
LACP Statistics [<port_list>] [clear]
Example: Configure port 5-8 to a LACP group
>lacp mode 5-8 en (Mode = Enable)
>lacp key 5-8 100 (Key = 100)
>lacp role 5-8 act (Role = Enable)
5.6 Loop Protection
Feature Command Line
General Settings
Enable Loop
Protection
Syntax:
Loop Protect Mode [enable|disable]
Loop Protect Transmit [<transmit-time>]
Loop Protect Shutdown [<shutdown-time>]
Example:
>loop protect mode en
Transmission Time >loop protect trans 10 (10 seconds)