Intellinet 560931, Руководство пользователя

Страница: 147 / 281

147
LLC : Only (LLC) frames are allowed.
SNAP : Only (SNAP) frames are allowed.
IPv4 : The QCE will match only IPV4 frames.
IPv6 : The QCE will match only IPV6 frames.
SMAC
Displays the OUI field of a Source MAC address; i.e., first three octet (byte) of a MAC address.
DMAC
Specify the type of Destination MAC addresses for incoming frames. Possible values:
Any : All types of Destination MAC addresses are allowed.
Unicast : Only Unicast MAC addresses are allowed.
Multicast : Only Multicast MAC addresses are allowed.
Broadcast : Only Broadcast MAC addresses are allowed.
The default value is “Any.”
VID
Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the range 1-4095 or “Any.”
PCP
Priority Code Point: Valid values for PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or in a range (0-1, 2-3, 4-5,
6-7, 0-3, 4-7) or “Any.”
DEI
Drop Eligible Indicator: Valid values of DEI can be 0, 1 or “Any.”
Conflict
Displays QCE status. It may happen that resources required to add a QCE may not available. In that
case, it shows conflict status as “Yes”; otherwise, it is always “No.” Note that conflict can be resolved by
releasing the resource required by the QCE and clicking “Refresh.”
Action
Indicates the classification action taken on ingress frame if parameters configured are matched with the
frame's content.
There are three action fields: Class, DPL and DSCP.
Class : Classified QoS class..
DPL : Classified Drop Precedence Level.
DSCP : Classified DSCP value.