Intellinet 560931 Скачать руководство пользователя страница 212

Страница: 212 / 281

212

supplicant's first

response packet to

the backend server.

Indicates the switch

attempted

communication with

the backend server.

Possible

retransmissions are

not counted.

MAC-based:

Counts all the

backend server

packets sent from the

switch towards the

backend server for a

given port (left-most

table) or client

(right-most table).

Possible

retransmissions are

not counted.

Last Supplicant/Client Info

Information about the last supplicant/client that attempted to authenticate. This information is available

for the following administrative states:

• Port-based 802.1X

• Single 802.1X

• Multi 802.1X

• MAC-based Auth.

Last Supplicant/Client Info

Name

IEEE Name

Description

MAC

Address

dot1xAuthLastEapolFrameSource The MAC address of the last supplicant/client.

VLAN ID

The VLAN ID on which the last frame from the last

supplicant/client was received.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды