Intellinet 560931 Скачать руководство пользователя страница 66

Страница: 66 / 281

Ethernet Type

: Only Ethernet Type frames can match this ACE. The IEEE 802.3 describes the value of

Length/Type Field specifications to be greater than or equal to 1536 decimal (equal to 0600 hexadecimal).

ARP

: Only ARP frames can match this ACE. Notice the ARP frames won't match the ACE with ethernet

type.

IPv4

: Only IPv4 frames can match this ACE. Notice the IPv4 frames won't match the ACE with ethernet

type.

IPv6

: Only IPv6 frames can match this ACE. Notice the IPv6 frames won't match the ACE with ehternet

type.

Action

Specify the action to take with a frame that hits this ACE.

Permit

: The frame that hits this ACE is granted permission for the ACE operation.

Deny

: The frame that hits this ACE is dropped.

Rate Limiter

Specify the rate limiter in number of base units. The allowed range is

Disabled

indicates that the

rate limiter operation is disabled.

Port Copy

Frames that hit the ACE are copied to the port number specified here. The allowed range is the same as
the switch port number range.

Disabled

indicates that the port copy operation is disabled.

Mirror

Specify the mirror operation of this port. Frames matching the ACE are mirrored to the destination mirror
port. The allowed values are:

Enabled

: Frames received on the port are mirrored.

Disabled

: Frames received on the port are not mirrored.

The default value is "Disabled".

Logging

Specify the logging operation of the ACE. The allowed values:

Enabled

: Frames matching the ACE are stored in the System Log.

Disabled

: Frames matching the ACE are not logged.

Note that the System Log memory size and logging rate is limited.

Shutdown

Specify the port shut down operation of the ACE. The allowed values:

Enabled

: If a frame matches the ACE, the ingress port will be disabled.

Disabled

: Port shut down is disabled for the ACE.

Counter

The counter indicates the number of times the ACE was hit by a frame.

MAC Parameters

SMAC Filter

(

Only

displayed when the frame type is Ethernet Type or ARP.)

Specify the source MAC filter for this ACE.

Any

: No SMAC filter is specified. (SMAC filter status is "don't-care".)

Specific

: If you want to filter a specific source MAC address with this ACE, choose this value. A field for

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды